wavlink wifi extender setup without wps – AP.Setup

WL WN579A3 1200M Extender Setup

admin — Mon, 15 Jan 2024 06:41:22 +0000

WL WN579A3 1200M Extender Setup is a Wavlink extender device designed to swiftly expand the range of WiFi signals. Here, you’ll find accurate and detailed information about this Wavlink extender product.

Unbox The WL WN579A3 1200M Extender Setup

When unboxing, you’ll find your Wavlink extender device along with a lengthy Ethernet cable. Additionally, the packed box includes a manual guide for WL WN573A3 1200M.

WL WN579A3 1200M Extender Setup Technical Features

Dual Frequency Bands: Supports dual frequency bands for a robust WiFi signal and broad coverage.
High-Power Amplifier: The 1200M extender has a built-in high-power amplifier, easily penetrating walls for stronger WiFi connectivity.
Easy Installation and Login: The process of installing and logging into the WL WN579A3 1200M WiFi extender is simple.
Dual Bands: Operates on both 2.4GHz and 5GHz frequency bands for versatile connectivity.
External Antennas: Equipped with four external 5dbi antennas for improved signal strength.
Wireless Security: Implements WPA-PSK/WPA2-PSK, providing two wireless security encryptions for enhanced protection.

Login Into WL WN579A3 1200M Extender

The login process for this Wavlink extender device is straightforward, allowing you to complete it quickly on your own.

Start by connecting the extender to your mobile phone.
Attach your mobile phone to the Wavlink_EXT network.
Open the browser on your WiFi-connected device and enter the web address in the search bar.
After completing the above steps, the login page will appear on your display.
Fill in the credentials displayed on the login page, including the username and security password.
If you’re unsure about the credentials, check the label or the bottom of your device.

The WL WN579A3 1200M Extender Setup Procedure

Through three methods you can easily do the WL WN579A3 1200M Extender Setup process of the Wavlink extender.

By pressing the WiFi Protected System button.
Through an ethernet cable.
Using the Web UI.

WL WN579A3 1200M Extender Setup By WPS Button

Examine the following steps to WL WN579A3 1200M Extender Setup using the WPS button.

Start by plugging your Wavlink extender device into an electrical socket.
Utilize the Wavlink extender device’s WPS button.
Shortly after, press the WPS button on the host router device.
Wait for a while to observe a solid blue LED on both the extender and router devices.
Once the solid blue LED is visible, it indicates the completion of the setup process between the extender and router.

WL WN579A3 1200M Extender Setup Manually

WL WN579A3 1200M Extender Setup via manual method involves the following steps:

Start by obtaining a lengthy Ethernet cable.
Connect one end of the Ethernet cable to an extender Ethernet port.
Attach the other end of the cable to the router’s Ethernet port.
Ensure that your existing router is connected to the WiFi device.
Disconnect the extender power plug from the wall socket.
Wait for 2 to 3 minutes to observe a solid blue LED on both the extender and router devices.

Finally, the main router and your WL WN579A3 1200M extender setup have been successfully linked with each other during the configuration process.

WL WN579A3 1200M Extender Setup Via Web UI

Start by plugging your Wavlink extender power plug into an electrical socket.
Use the cable provided with the Wavlink extender gadget.
Attach your Wavlink WiFi extender to a computer using an Ethernet cable.
Enter the web or IP address ie 192.168.10.1
After inputting the on-screen details, you’ll see the configuration link on your display.
Follow all the setup details step by step to complete the process.

Note: If you experience any problems with the WL WN579A3 1200M extender after setting it up, refer to the below troubleshooting advice for all types of problems.

Confirm all cable connections linked to your Wavlink extender.
Upgrade the hardware and firmware of your Wavlink WiFi extender.
Review the placement of your Wavlink WiFi extender device.
Avoid placing your extender and router near metal objects.
Reset your WL WN579 1200M extender setup device.

WL WN579A3 1200M Extender Firmware Update:

Updating the firmware for the WL WN579A3 1200M Extender involves the following steps:

Access the extender’s web-based setup page.
Navigate to the “Firmware Update” section within the interface.
Download from the manufacturer’s website, If a new firmware version is available.
Upload the downloaded firmware file through the extender’s interface.
Initiate the firmware update process and allow it to run to completion.
Ensure a stable internet connection
Once the update is finished, the WL WN579A3 1200M Extender will be operating with the latest firmware, potentially enhancing performance and addressing compatibility issues.

WL WN579A3 1200M Extender Factory Reset:

Performing a factory reset on the WL WN579A3 1200M Extender:

Locate the reset button on the extender device.
Press and hold the reset button.
Hold the button for approximately 10 seconds until you observe the LEDs blinking.
Release the reset button to complete the factory reset process.
Reconfigure the extender by following the initial setup process.
This action is useful for resolving issues or restoring the extender to its original state.

Note: Following the reset procedure, you will need to reconfigure the extender. If you have any questions after going through this entire page, feel free to chat with our technical team experts. They will assist you in resolving any extender-related issues efficiently, ensuring minimal time is spent on troubleshooting.

Some Issues You Might Face during WL WN579A3 1200M Extender Setup

Wavlink login issues
Wifi.wavlink.com not functioning
Troubleshooting for non-functional WiFi repeater
Identifying reasons for WiFi extender malfunction
Issues with Ethernet extender functionality
Troubleshooting WiFi extender password problems
Wavlink router not operational
Unable to connect to IP address
Resolving Wavlink yellow light indicator problems
Addressing Wavlink red light indicator problems

Common Wavlink Extender Setups

Some Problems You May Experience while WL WN579A3 1200M Extender Setup

The following issues could come up while WL WN579A3 1200M Extender Setup

Problems with the Electrical Connection
Issues with Network Connections
Issues with Setup
Problems with Web Interface Access and Update Firmware
Issues with Placement and Range
Problems Connecting the Device
Issues with Signal Strength and Interference:
Problems with WPS Configuration
Problems with the Security Configuration
issues with the wireless security setup of the extender.

Check for firmware updates, carefully follow the setup instructions in the user manual, and make sure the extender is positioned correctly for optimal results in order to overcome these challenges. Should problems persist, you may wish to contact technical support for assistance.

FAQ

Q1: How do I perform WL WN579A3 1200M Extender setup for the first time?

A: Begin by connecting the extender to a power source. Use a computer or mobile device to connect to the extender’s Wi-Fi network. Open a web browser and follow the on-screen instructions to complete the setup process.

Q2: Is the WL WN579A3 1200M Extender compatible with my router?

A: Yes, the extender is designed to work with most routers, supporting standard Wi-Fi protocols. Ensure compatibility by checking your router’s specifications.

Q3: What is the recommended placement for optimal performance?

A: Place the extender within the range of your existing Wi-Fi network. Experiment with different locations to find the best spot for extended coverage, avoiding interference from other electronic devices.

Q4: Can I change the extended network’s name and password?

A: Yes, you can customize the extended network’s SSID and password through the extender’s web interface. Access the settings section and modify the wireless configuration as needed.

Wavlink N300 Setup

admin — Fri, 12 Jan 2024 07:40:09 +0000

Completing the Wavlink N300 setup process brings numerous advantages, including a stable internet signal, the ability to achieve optimal internet speeds, and the elimination of WiFi dead spots in your area. While you can independently install this device, it’s recommended to first gain a comprehensive understanding of the configuration process. For a straightforward setup, carefully read and follow the provided directions.

Pre-Requirements For Wavlink N300 Setup

Keep the following requirements ready before beginning the Wavlink N300 setup process in order to complete the Wavlink N300 wifi range extender setup. Examine each item on this list.

First and foremost is the N300 extender.
Also, its login credentials and web or IP address ie 192.168.10.1
Your existing router and access to the internet.
Further, any device containing a web browser.
Lastly, an electrical power socket.

Do Wavlink N300 Setup Through WPS

Utilize these instructions to perform the process.

Upon acquiring the N300 extender, plug it into an electrical socket.
Ensure that the extender is positioned near the router to establish a strong connection.
After a few seconds, the extender will become available for connection.
Subsequently, press and hold the extender’s WPS button until the LED changes color.
Within the next two minutes, press the router’s WPS button.
When the LEDs on both devices display indications, it signifies that the process is in progress.
Now, leave both devices undisturbed for some time to allow them to complete the process.
In the end, the LEDs on both devices will become constant with a solid color.

The Wavlink N300 setup will therefore be configured and prepared for connection in this manner. Now, connect your devices to the extender and enjoy the highest internet speed.

Wavlink N300 Configuration Through Internet Browser

You can use an alternative method if your current router’s WPS button is broken or malfunctioning. For the Wavlink N300 setup, this method will require you to use and access any web browser on your device.

Begin by plugging in the Wavlink N300 device and wait until it’s ready for configuration.
Using any device, open a web browser before proceeding.
Before moving to the next step, connect the device to the Wavlink network.
Subsequently, search for the extender’s default web or IP address in the search panel, which is either wifi.wavlink.com or 192.168.10.1.
Type either of them and press enter to access the sign-in page.
The sign-in page will appear, prompting you to fill in the login details.
Insert “admin” as both the username and password in the required fields during the sign-in process.
Once signed in, navigate to the network list on the subsequent page.
Select the network you wish to extend and proceed to complete the Wavlink N300 Setup.

Wavlink N300 Setup On The App

The Wavlink app is the alternative method for setting up the Wavlink N300 in addition to those two methods. In contrast to those two methods, this one requires you to download the Wavlink app to your device.

Once your device is connected to the network, open its official app store.
If you’re using an Android device, use the Google Play Store; for iOS devices, open the Apple App Store.
Download the Wavlink app, allowing your device to install it, and open it afterward.
Ensure you select the official and latest version of the app.
After installation, proceed with the login on the next page by agreeing to the app’s terms and conditions.
Upon successful login, the Wavlink N300 setup page will appear on the next screen.
From this page, choose the N300 network and click “extend” after entering its default password.
Finally, connect your other devices to the network by selecting its wireless network from the available list.

Consider These Points For Better Performance

Equally crucial for achieving a flawless Wavlink N300 setup, consider these essential factors to ensure an uninterrupted signal consistently. Firstly, verify the extender LED to assess its performance and connection strength, ensuring the light displays an optimal color.

Moreover, avoid placing the extender either too close or too far from both the router and connected devices. Additionally, ensure the accuracy and functionality of the wireless network and Ethernet cable used for the connection. Experiment with different locations and web browsers to thoroughly assess the performance of the Wavlink extender.

Update Firmware File

The firmware update for the extender is unquestionably a key component in its faultless operation. Go to the Wavlink N300 setup page and make the necessary update checks to accomplish this.

Start by verifying the extender’s current firmware version and ensure you have the latest version.
Download the corresponding new firmware file based on the Wavlink extender model number.
Access the Firmware Update option and upload the downloaded file.
Initiate the updating process after uploading the file, ensuring the PC remains powered on.
Allow the PC to complete the update process before proceeding.
After the process is finished, reboot both the PC and the extender.
The Firmware Update is now complete, and the extender is ready for connection

Reboot The N300 Extender

If you encounter issues with the extender’s network, consider rebooting the device. Before initiating this process, attempt to verify other factors such as the extender’s placement, potential signal interference, connection strength, and advanced settings. Make necessary adjustments in these aspects if required. If the error persists, proceed with power cycling.

To power cycle the extender, unplug it from the power socket and leave it disconnected for a few minutes. Afterward, choose an alternative socket and location for the extender. Observe the extender’s LED indicators to ensure proper functioning, and subsequently, reconnect your devices to it. Following these steps will help resolve Wavlink N300 setup errors efficiently.

Reset The Extender

Resetting and reconfiguring the extender is the other infallible way to fix its errors. To accomplish this, wait for the process to finish while pressing and holding the reset button located on the side or back panel. After completing the reset, repeat the Wavlink N300 setup procedure. Select a procedure from those options, then carefully carry it out using the setup information exactly as directed.

Rockspace AX1800 Firmware Update

WEBJD Wireless Extender Troubleshooting Tips

Netfun WiFi extender setup Troubleshooting Tips

Slow internet connection with Wavlink extender